Blind Mode - PRG MBOX DIRECTOR User Manual

Blind Mode

Blind mode allows changes (edits) to be made in Director without them being output to Mbox. This feature is similar to
Blind or Preview modes on lighting consoles, where edits to a show can be made on-the-fly without those changes
being immediately reflected on the stage. These changes can be saved or abandoned as desired.
Guidelines:
+
When Blind mode is activated, Director will continue to play the currently selected scene until Blind mode is
deactivated.
+
A scene with the yellow "blind" text next to it is the scene that is currently playing while edits are being made in
Blind mode.
+
If Blind mode is exited before the edits are saved (updated), Director will resume playing the currently selected
scene and all changes will be abandoned.
+
Pressing Undo ( Z) will reinstate the changes.
+
Once Blind mode is entered, you can select and edit other scenes without affecting output.
To enter Blind mode, press the [blind] button in the main screen. Press again to exit the mode. (The button is a toggle
action.)
®
86 MBOX DIRECTOR USER MANUAL
Blind Mode Button
Scene currently
being output to Mbox
Press Update button
to save changes