Scrub; Sync Stream - PRG MBOX DIRECTOR User Manual

Scrub

The current position of the timeline can be changed by entering a new time in the clock field or "scrubbed" using the
scrub feature.
To go to a new timecode position:
+ Click inside time clock field and enter a new clock position. The timeline will move to that position.
To scrub in the timeline:
+
Click inside the time clock field, then use the mouse to scrub forward or backward in the timeline. When the scrub
feature is enabled, the scrub arrow will be visible to the right of the clock as shown below. To deactivate
scrubbing, click outside the timeline.
+
Another method of scrubbing is to drag the playhead to the left or right. The scrub arrow will be visible on top of
the playhead during this action.
Click inside clock field to activate scrub feature

Sync Stream

The Sync Stream feature is used to synchronize playback of a layer on one server to a designated master layer on
another server. (Refer to the Mbox Media Server User Manual for more information on synchronization.)
To setup sync stream:
Step 1. At server master controls, click on Sync tab.
Step 2. At Sync Stream, choose stream as required.
Step 3. Enter a sync offset, if required.
Timecode Scrub
Select and drag playhead
Playhead Scrub
Sync Stream Options
®
MBOX DIRECTOR USER MANUAL 63