Adding Fixtures - PRG MBOX DIRECTOR User Manual

Adding Fixtures

Once the network is configured and the Mbox servers are connected, the servers will need to be added to Mbox
Director so they can be controlled. The "Add Fixture" window is used to locate Mbox servers on the network.
Before adding fixtures, it is a good idea to configure the DMX Profile type at the Mbox server's Setup window
(such as Single Output, Panoramic Dual, Dual Independent, etc.) For more information, refer to
Configuration / Using Dual Output Features"
Note: Refer to "Important Concepts"
To add fixtures:
Step 1. At Mbox Director main screen, click Add Fixture icon [+]. (If no servers are connected, the button will be
flashing.)
Add Fixture
Delete Fixture
Server Name
Server IP
Protocol
(Art-Net / sACN)
Active Layers
DMX Profile
Specify as
Monitor only
Sample Mbox
Server Setup:
®
12 MBOX DIRECTOR USER MANUAL
on page 15.
on page 3 for definitions of "Fixture" and "Server."
"Changing
Profile Setting
(Mbox, Serial-
Over-Ethernet)
Fixture List
(Connected
Servers)
Set as Backup
Enable
Passthrough