Editing Multiple Layers; Selecting Multiple Layers; Setting/Resetting All Layer Parameters To Same Value - PRG MBOX DIRECTOR User Manual

Editing Multiple Layers

Multiple layers can be selected and edited at the same time. This can be used for quick editing or to create fan
offsets.

Selecting Multiple Layers

Multiple layers can be selected using the Shift [] and Command [] keys.
+
Hold down [] while clicking on layer icon boxes to select a range of layers.
+
Hold down [] while clicking on layer icon boxes to select individual layers.
Note: When multiple layers are selected and different layers have different parameter values, the numeric value will
be italicized. Refer to "Adjusting Relative Offset Across Layers"

Setting/Resetting All Layer Parameters to Same Value

If multiple layers are selected and a slider is used to change a parameter value, or a new value is entered into the
parameter field, Director will set (or reset) that parameter to the same value for all selected layers.
Multiple Layers Selected
on page 52 for more information.
Slider
®
MBOX DIRECTOR USER MANUAL 51