External Control Setup; Controlling Director With A Lighting Console - PRG MBOX DIRECTOR User Manual

External Control Setup

Controlling Director with a Lighting Console

In order to use trigger controls from a lighting console, the correct output settings must be configured at the console.
For example, when using a PRG Vx76 control console, the output configuration is set using the Settings window.
To configure Vx76 console MIDI output:
Step 1. At console's Setup menu, select Settings.
Step 2. At Settings window, select Midi tab.
Step 3. At MIDI Output section, choose an output using drop-down menu. This setting will depend on your own
particular setup. (IAC Driver Bus 1 is selected in this example.)
Step 4. At MIDI ID field, enter a number. In most cases, 0 will work.
Step 5. At Format field, enter a number. In most cases, 1 will work.
Step 6. Select "All Submasters" radio button.
Step 7. Select "Go Cue #" radio button.
When the "last received" menu items are no longer grayed out, this indicates that Director is successfully receiving
MIDI data.
MIDI data is being received
®
MBOX DIRECTOR USER MANUAL 69