Window Indicators - PRG MBOX DIRECTOR User Manual

Window Indicators

+
When dragging parameter values onto a preset button, the drop location will show a green ring to indicate where
the data will be dropped. Pressing [Esc] on the keyboard will cancel the drag.
+
If parameters are dragged onto an existing preset, a merge is performed, adding values for parameters with no
replacing
existing values, and
+
The color-coded indicators on the parameter reset buttons indicate if a parameter is currently using a preset
reference. A vertical blue stripe is used to indicate this condition. Clicking the Reset button removes the preset
reference from that parameter in addition to other parameter adjustments like timing, delay, etc.
+
The preset Recall buttons have a white ring around them to show which one was last clicked or when the reveal
function is used. When manually recalling a preset reference value for a parameter (by clicking the Recall button)
or storing a preset reference (by clicking the Store button), the pre-existing presets which have that parameter for
that fixture stored in them will be ringed in yellow. (These are the same presets that can be shown by opening the
F5 menu when storing or revealing presets.)
+
The buttons will show a grey dot at their top-left to indicate that the preset holds data for one of the fixtures in the
current selection. Narrow down the list by selecting one fixture at a time and noting what fixture is selected when
the dot appears.
®
76 MBOX DIRECTOR USER MANUAL
existing values when parameters already have a value stored in the preset.