System Setup : Advanced menu
High Altitude Mode
•
Press ◄/► to enable or disable High Altitude Mode. Enable this function when the operating
altitude is higher than 1500m or the ambient temperature is over 40°C.
•
Dynamic Dimming
Press ◄/► to enable or disable dynamic dimming function. Enable the function to automatically
reduces the screen's brightness level when the displayed image contains a high proportion of
bright areas.
When 3D Sync Mode is
Audio Settings
•
Press ENTER to enter the Audio Settings menu. See
for more details.
•
Light Settings
Press ENTER to enter the Light Settings menu. See
more details.
•
Security Settings
Press ENTER to enter the Security Settings menu. See
page 55
for more details.
•
HDBaseT
Press ◄/► to enable or disable the HDBaseT.
Note:
•
Turn on HDBaseT mode will disable internal LAN and RS232 control and switch to Normal
power standby mode automatically.
•
When high altitude mode on, power force to 85%.
52
, the Dynamic Dimming function is not available.
DLP Link
"Audio Settings menu" on page 54
"Light Settings menu" on page 55
"Security Settings menu" on
for