3. 4:3: Scales an image so that it is displayed in
the center of the screen with a 4:3 aspect
ratio. This is most suitable for 4:3 images
like computer monitors, standard definition
TV and 4:3 images aspect DVD movies, as it
displays them without aspect alteration.
4:3 picture
5. 16:10: Scales an image so that it is displayed
in the center of the screen with a 16:10
aspect ratio. This is most suitable for images
which are already in a 16:10 aspect, as it
displays them without aspect alteration.
16:10 picture
•
2D Keystone
Press ENTER and press ▲/▼/◄/► to adjust horizontal or vertical distortion brought by the
projection angle.
Corner Fit
•
Press ENTER to enter the Corner Fit menu. See
details.
•
Position
Press ENTER and press ▲/▼/◄/► to adjust the position of the projectored picture.
Phase
•
Press ◄/► to adjust Phase for the projectored picture.
•
H. Size
Press ◄/► to adjust H. Size for the projectored picture.
Digital Image Resizing
•
Press ENTER to enter the Digital Image Resizing menu. See
page 40
for more details.
•
Native Resolution
Press ENTER to enter the Native Resolution menu. See
Overscan
•
Press ◄/► to hide edge of the projected image to damage the noise.
•
3D
Press ENTER to enter the 3D menu. See
•
Fast Mode
Press ◄/► to enable or disable Fast Mode.
4. 16:9: Scales an image so that it is displayed
in the center of the screen with a 16:9
aspect ratio. This is most suitable for images
which are already in a 16:9 aspect, like high
definition TV, as it displays them without
aspect alteration.
16:9 picture
6. 2.4:1:Scales an image so that it is displayed
in the center of the screen with a 2.4:1
aspect ratio. This is most suitable for
widescreen cinemascope formats for movie
theaters or images which already vary to
2.40 aspect, as it displays them without
aspect alteration.
2.4:1 picture
"Corner Fit menu" on page 40
"Digital Image Resizing" on
"Native Resolution" on page
"3D menu" on page 42
for more
41.
for more details.
39