Table of Contents
Advertisement
OPERATION OF YOUR REMOTE CONTROLED EG GAS BURNER (SIT 845 valve)
OPERATION OF YOUR REMOTE CONTROLED EG GAS BURNER (SIT 845 valve)
REMOTE CONTROL FEATURES
Programming Button
Press and release the
SETTING THE DAY OF THE WEEK AND TIME
With the remote off, press and hold the 'T/P' button for 2 seconds or longer to initiate programming the
time. The Time, Hour setting and AM/PM will flash.
Setting the hour function: Press and release the ▲ or ▼ button to increase or decrease the hour setting
by 1 hour. Please ensure that AM/PM is set correctly. Press 'OK' to accept. The minute digits will begin to
flash.
Setting the minute function: Press and release, the ▲ or ▼ button to increase or decrease the minute
setting by 1 minute. Press and hold the ▲ or ▼ button for 2 seconds or longer to increase or decrease
the minute setting by 1 minute every 0.5 seconds. Press 'OK' to accept. The days of the week will begin to
flash.
Setting the day of the week function: Press and release the ▲ or ▼ button to change the day of the
week to the following or previous day. Press and hold the ▲ or ▼ button for 2 seconds or longer to in-
crease or decrease the day of the week by 1 day every 0.5 seconds. Press 'OK' to complete setting.
The time and day of the week is now set.
USING THE VARIOUS MODES
While the remote is switched on, pressing and releasing the MODE button will cycle between all available
modes. These are:
Manual Mode→Auto Mode→Flame Mode→Manual Mode
Manual mode
Manual mode does not require that the time and day of the week to be set. Press the ▲ or ▼ button to
increase or decrease the temperature as desired. The Fan speed can be adjusted at any time by
pressing the 'F' button. Pressing and releasing the 'F' button will cycle through fan speeds of 1, 2, 3 Off
and back to 1.
Automatic mode
The automatic mode allows the temperature to be regulated according to a programmed level and time.
At any time, the temperature may be adjusted up or down. However, whenever the remote changes to a
new time period, the temperature will be set automatically according to that period's setting. The Fan
speed can be adjusted at any time by pressing the 'F' button. Pressing and releasing the 'F' button will
cycle through fan speeds of 1, 2, 3 Off and back to 1. Note, that the fan speed will not change automati-
cally, but remain at the last selected speed.
24
Due to continued product improvement, Warmington Ind LTD reserves the right to change product specifications without prior notification.
Mode Button
Temperature/
Fan 'F' Button
button to turn the remote on and off.
All Dimension are in mm.............Copyright ©
7 October 2021
On/off
Button
Up ▲ Button
Down ▼ Button
Advertisement
Table of Contents
