Fire and flue system installation, and instructions to comply with ASNZS 2918:2001
Keep these instructions for further reference. Ensure that you have the correct and current installation details for the Warmington fireplace.
The Warmington unit is to be installed by a certified Warmington installer or an approved NZHHA installation technician.
A licenced certified gas fitter and licenced electrician are required to run power and gas supplies as required to the unit and any commissioning as part of the
installation process.The heater must be installed according to these instructions and in compliance with all relevant building, gas fitting, electrical and other
Read all the instructions carefully before commencing the Installation. Failure to follow these instructions may result in a fire hazard and void the warranty
1
Due to continued product improvement, Warmington Ind LTD reserves the right to change product specifications without prior notification.
Zero Clearance Firebox - WOOD
NOTE: Custom built to clients requirements and to current standards.
For Period Style Fireplaces
Warmington ADD Cowl
S/S Flashing
See www.homeheat.co.nz/members for a certified NZHHA SFAIT Installer in your area.
Page 1
Related documents Fire and flue system installation, and instructions to comply with ASNZS 2918:2001 Keep these instructions for further reference. Ensure that you have the correct and current installation details for the Warmington fireplace. Installation The Warmington unit is to be installed by a certified Warmington installer or an approved NZHHA installation technician.
Page 3
This will ensure that the draft in the flue system is always to the outside. “CAITEC AIR” the limits and requirements. See details in these Spec’s, on www.warmington.co.nz or contact your local Agent. Wind Noise: You may encounter wind noise in some installations.
Page 8
This is a general installation guide only – Contact a “NZHHA Installer” for Installation Advice. See : www.homeheat.co.nz , choose “members” & pick your Area & Fire type (wood / Gas etc) this will provide you with a NZHHA Certified Installer (use the SFAIT Installers Only .) Install the first length of flue pipe with the crimped end down, inside the Adaptor collar, ensure that the flue pipe is sealed into the collar with exhaust sealant.
Need help?
Do you have a question about the WOOD and is the answer not in the manual?
Questions and answers