Troubleshooting; Specifications - Unit USP-1000D Instruction Manual

Instr_USP-1000D#2
ENGLISH

TROUBLESHOOTING

Description
Difficult to close the
Lid (2).
Difficult to open the
Lid (2).
Steam leak-off Lid (2). 1. No Sealing Gasket (20).
Steam leak-off
Floating Valve (4).
The Floating Valve (4)
fails to move up.

SPECIFICATIONS

Model Rated Voltage Power
USP-1000D 220-240 V,
50-60 Hz
Limiting Holding
Pressure Temperature
90 kPa 60-80°C
Manufactured by:
This appliance is to be stored and used under the following conditions: temperature – not less than
+5°C; relative humidity - not greater than 80%; aggressive impurities in the air: not allowable.
As the Manufacturer is constantly working on improvement of its products, the design and technical
10
1/2/04 9:28 AM Page 10
Cause
1. The Sealing Gasket (20) is not
well fixed.
2. The Floating Valve (4) stuck on
the Valve (4) stem.
1. The Floating Valve (4) fails to drop 1. Press the Floater (5) slightly
after steam release.
2. Food residues on the Sealing
Gasket (20).
3. Damage Sealing Gasket (20).
4. The Lid (2) is not well fitted.
1. Food residues on the Sealing
Gasket (18).
2. Damage the Sealing Gasket (18).
1. Insufficient food or water.
2. Steam leak-off the Lid (2) or the
Relief Valve (3).
1000 W
Pre-set Time
1-9 hours
«UNIT Handelsgesellschaft m.b.H.»
131, Gersthofer Str., A-1180, Vienna, Austria
specifications are subject to change without prior notice.
www.unit.ru
Solution
1. Fix the Sealing Gasket (20) well.
2. Push the stem slightly.
with the chopstick.
1. Put the Sealing Gasket (20).
2. Clean the Sealing Gasket (20).
3. Replace the Sealing Gasket (20).
4. Fit the Lid (2) according
to directions.
1. Clean the Sealing Gasket (18).
2. Replace the Sealing Gasket (18).
1. Add more food or water in line
with directions.
2. Send it to service station
for maintenance.
Capacity Diameter
6 L 22 cm
Pressure- Max Keep-
keeping Time warm Time
0-99 minutes 24 hours
Working
Pressure
0-70 kPa
Lifetime
20000 cycles,
but no more
than 5 years
from the date
of the
purchase