Instr_USP-1000D#2
1/2/04
ENGLISH
APPLIANCE USE
1. Open the Lid (2).
Hold the Handle (1) firmly, turn it clockwise to the clamping position and then lift it (see the figures 1, 2).
The Lid (2) can stand on the Support (13), see the figure 3.
сировать
Figure 1
2. Take out the Inner Pot (6) and fill in food and water. Make sure the cooker must never be filled more
than 4/5 full or less than 1/5 full. When cooking expandable food, do not fill the cooker more than
3/5 full. See the figures 4, 5, 6.
1/5 full
Figure 4
3. Clean the Inner Pot (6) and the Heating Plate (16) before cooking: be sure there are no sundries
left in the Outer Pot (7) or on the surface of the Heating Plate (16); turn the Inner Pot (6) slightly fit
it well with the Heating Plate (16). See the figure 7.
Figure 7
4. Close the Lid (2).
•
Check if the Sealing Gasket (20) has been put on the Inner Steel Ring (21).
•
Move the Sealing Gasket (20) to make sure it fit snugly in place in the Lid (2).
•
Close the Lid (2) and turn the Handle (1) counter-clockwise till a sound of clamping is heard. See
the figures 8, 9.
6
9:28 AM
Page 6
Figure 2
4/5 full
Figure 5
Figure 3
3/5 full
Figure 6
Need help?
Do you have a question about the USP-1000D and is the answer not in the manual?
Questions and answers