Displaying Status Information; System And Test Status Messages - Paradyne 9120 User Manual

Displaying Status Information

System and Test Status Messages

9121-A2-GB20-00
Select . . .
PVC Connection Status
DBM Interface Status
Procedure
To display statuses:
1. Use the following menu sequence:
Main Menu Status
2. Select the type of information you want to view
(e.g., Status PVC Connection Status ).
The following sections provide information about the status information that is
available.
System and test status information is selected from the Status menu:
Main Menu Status
All messages are listed in alphabetical order.
June 1997
Displaying System Information
To . . .
View Source (or originating), Primary Destination, and
Alternate Destination information for each
PVC connection. Information includes:
Links (interfaces)
DLCIs
EDLCIs
Network statuses
Management PVCs are also shown.
View the ISDN BRI DBM's interface (BKP), if installed
and enabled. Information includes:
Operating mode
Name of the active ISDN call profile's destination
Last cause value message
Calling ID of the remote DBM
System and Test Status
4-3