Displaying Statistical Information - Paradyne 9120 User Manual

Displaying System Information

Displaying Statistical Information

4-18
The following sets of statistics appear, based upon the interface selected:
Select . . .
1
Network Physical
Network Frame Relay
2
Port-1 or 2 Physical
3
Port-1 or 2 Frame Relay
4
DBM Physical
3, 4
BRI-B1 Frame Relay
3, 4
BRI-B2 Frame Relay
Clear Statistics
Selection only appears when:
1
Line Framing Format is set to ESF.
2
Port is enabled.
3
Interface (the port, BRI-B1, or BRI-B2) is enabled and the frame relay
Link Status is enabled.
4
ISDN BRI DBM is installed and enabled.
Procedure
To display performance statistics:
1. Use the following menu sequence:
Main Menu Status
2. Select the interface and type of information you want to view
(e.g., Performance Statistics
You can clear statistical information to start over when you want to observe and
estimate the frequency or duration of a specific condition (e.g., gathering
information for reporting a problem to the network).
The following sections provide information about the statistical metrics collected.
June 1997
For the . . .
Network interface's physical performance statistics.
Network interface's frame relay performance statistics.
Port physical interface's performance statistics.
Port's frame relay performance statistics.
ISDN BRI DBM's physical interface (labeled DBM)
performance statistics.
DBM's BRI frame relay performance statistics for
B channel 1.
DBM's BRI frame relay performance statistics for
B channel 2.
Screen that allows performance statistics to be cleared
(reset to 0). You can clear these statistics for the
individual interfaces, or for all interfaces.
Statistics can also be cleared from the individual
performance statistics screens.
Performance Statistics
Port-1 Physical ).
9121-A2-GB20-00