System Requirements; Package Contents; Trademarks - NEC 78K0/Fx2 User Manual

Table of Contents

78K0/Fx2 – CAN it!

1.2 System requirements

HOST PC

A PC supporting Windows 98SE, Windows ME, Windows 2000 or

Windows XP is required for the IAR Systems Embedded Workbench

demo-version and the FPL3 FLASH programming software.

Pentium 166 MHz (at least), 128 MB of RAM, 256-color display (1024 *

768), mouse, CD-ROM drive and 200 Mbytes of free hard disk space are

required to install the tool packages.

Above listed requirements are valid for the IAR Systems Embedded

Workbench and the FPL3 FLASH programming software.

Host interface

USB interface that enables communication based on USB (Ver1.1 or

later)

Please verify that you have received all parts listed in the package contents list attached to the

78K0/Fx2 – CAN it! package. If any part is missing or seems to be damaged, please contact the dealer

from whom you received your 78K0/Fx2 – CAN it!.

Note:

Updates of the IAR Embedded Workbench for 78K, FP3 FLASH programming software,

documentation and/or utilities for 78K0/Fx2 – CAN it!, if available, may be downloaded from the

NEC WEB page(s) at

IAR Embedded Workbench, visualSTATE, IAR MakeApp and C-SPY are registered trademarks of IAR

Systems AB. Microsoft and Windows are registered trademarks of Microsoft Corporation. Adobe and

Acrobat Reader are registered trademarks of Adobe Systems Incorporated.

All other product names are trademarks or registered trademarks of their respective owners.

http://www.eu.necel.com/updates

Table of Contents