Chapter 5 Operation Check Using System Simulator Sm; Building The Sample Program - NEC 78K0S/K 1+ Series Application Note

CHAPTER 5 OPERATION CHECK USING SYSTEM SIMULATOR SM+

This chapter describes how the sample program operates with system simulator SM+ for 78K0S/Kx1+, by using the
assembly language file (source files + project file) that has been downloaded by selecting the
Caution System simulator SM+ for 78K0S/Kx1+ is not supported with the 78K0S/KU1+ microcontroller (as
of August 2007). The operation of the 78K0S/KU1+ microcontroller, therefore, cannot be checked
by using system simulator SM+ for 78K0S/Kx1+.
5.1

Building the Sample Program

To check the operation of the sample program by using system simulator SM+ for 78K0S/Kx1+ (hereinafter referred
to as "SM+"), SM+ must be started after building the sample program. This section describes an example of the
operation sequence, from building the sample program with integrated development environment PM+, using the
assembly language file (source files + project file) that has been downloaded by selecting
For how to build other downloaded programs, refer to CHAPTER 3 REGISTERING INTEGRATED DEVELOPMENT
ENVIRONMENT PM+ PROJECTS AND EXECUTING BUILD in the
Application Note.
For the details of how to operate PM+, refer to the
(1) Start PM+.
(2) Select "tm00.prw" by clicking [Open Workspace] from the [File] menu and click [Open]. A workspace into which
the source file will be automatically read will be created.
(3) Select [Project Settings] from the [Project] menu. When the [Project Settings] window opens, select the name
of the device to be used (the device with the largest ROM or RAM size will be selected by default), and click
[OK].
Select the device name
Click the [OK] button
Application Note U18887EJ1V0AN
78K0S/Kx1+ Sample Program Startup Guide
PM+ Project Manager User's
icon.
, up to starting SM+.
Manual.
Click
29