Angelo Decor AD97705 Quick Start Manual

Bear Waterfall Fountain AD97705
We hope you will find these instructions helpful in setting up your product. If you have any issues with this item,
DO NOT return the unit to place of purchase. Please visit our web site www.angelodecor.com for
assistance and warranty information.
Carefully unpack and arrange all Retrieve the tubing and light Attach the tubing to the pump.
parts. connection from the fountain. Water flow can be adjusted using
The light connection must sit the control on the front of the pump.
outside the fountain.
IMPORTANT: to prevent water loss
during operation, create a drip-loop
with the light cables by dipping them
into the reservoir before they exit out
the back of the fountain.
Place the pump inside the fountain. Securely attach the cable from the
light connection to the transformer.
Fill with clean water and plug into a grounded GFCI outlet.
The pump must be fully submersed at all times to avoid pump burnout.
This product must be dried and stored during freezing temperatures.
Printed in China