Angelo Decor AD97795 Manual

Gravenhurst Fountain
We hope you will find these instructions helpful in setting up your product. If you have any issues with this item,
DO NOT return the unit to place of purchase. Please visit our web site www.angelodecor.com for
assistance and warranty information.
Carefully unpack and arrange all
parts.
Locate the tubing from inside the
fountain and connect it to the
pump. Flow can be adjusted
using the dial on the front of the
pump.
Fill with clean water and plug into a grounded GFCI outlet.
The pump must be fully submersed at all times to avoid pump burnout.
This product must be dried and stored during freezing temperatures.
Retrieve the light connection from
inside the fountain.
The light connection must sit
outside the fountain.
IMPORTANT: to prevent water
loss, create a drip-loop with the
light cords by dipping it into the
reservoir before it exits out the
back of the fountain.
Align the cords and slide the
pump access door in to place.
AD97795
Securely attach the cord from the
light to the transformer.
Printed in China