Angelo Decor Alpine Falls AD97728 Quick Start Manual

Alpine Falls Fountain
We hope you will find these instructions helpful in setting up your product.
If you have any issues with this item, DO NOT return the unit to place of purchase.
Please visit our web site www.angelodecor.com for assistance and warranty information.
Arrange all the parts on Arrange all the parts on
the work area. the work area.
Place the pump inside the reservoir so that the
pump is fully submersed.
The final assembly
should look like this
Fill with clean water and plug into a grounded GFCI outlet.
The pump must be fully submersed at all times to avoid pump burnout.
Product must be properly stored for winter.
Locate the tubing from inside the Locate the tubing from inside the
fountain and connect it to the pump. fountain and connect it to the pump.
AD97728
The pump is preset to full strength. The pump is preset to full strength.
If splash is a concern, adjust as If splash is a concern, adjust as
needed. needed.