Angelo Decor AD97715 Quick Start Manual

3 Little Birds Fountain
We hope you will find these instructions helpful in setting up your product. If you have any issues with this item, DO NOT
return the unit to place of purchase. Please visit our web site www.angelodecor.com for assistance and warranty
information.
Carefully unpack and
arrange all parts.
Locate the tubing from
inside the pump
housing and attach it to
the pump.
Fill with clean water and plug into a grounded GFCI outlet.
The pump must be fully submersed at all times to avoid pump burnout.
This product must be dried and stored during freezing temperatures.
Lift and lower the bowl
on to the pedestal.
Align the grooves, then
twist and lock it to the
pedestal.
Align the pump
housing and lower it in
place. Twist and lock
it to the bowl.
If needed, the included
shims can be used to
level the fountain.
Pass the power cord
from the pump down
the cord pipe in the
bowl then down the
pedestal.
Install the decorative birds to their respective locations as shown above.
Retrieve and align the
cord with the groove at
the base of the
pedestal.
AD97715
Install the cord pipe
cover by aligning the
cord then fitting it over
the pipe and cord.
Printed in China