Angelo Decor AD97741 Quick Start Manual

Fossil Falls Fountain
We hope you will find these instructions helpful in setting up your product.
If you have any issues with this item, DO NOT return the unit to place of purchase.
Please visit our web site www.angelodecor.com for assistance and warranty information.
Arrange all the above parts in your work area. Arrange all the above parts in your work area.
Place the pump inside the reservoir so that it is
sitting flat.
Fill with clean water and plug into a grounded GFCI outlet.
The pump must be fully submersed at all times to avoid pump burnout.
Product must be properly stored for winter.
The final assembly
should look like this
Locate the tubing from inside the fountain and Locate the tubing from inside the fountain and
connect it to the pump. The pump is preset to full connect it to the pump. The pump is preset to full
strength, if splash is a concern adjust the flow strength, if splash is a concern adjust the flow
control as needed. control as needed.
AD97741