Advertisement
【 1】 WIRING
1 1 1 1 - - - - 1 Power Supply Cord
1 Power Supply Cord
1 Power Supply Cord
1 Power Supply Cord
Connect electric cord A to ON/OFF switch of
machine head. Connect the cords with blue and
brown color to 2 of 3 terminal of B, C, D.
The cord with green/yellow color is earth cord
which should be connected to earth terminal.
＜ Note ＞
When connecting electric cord, make sure to turn off
the switch of main power source.
＜ Note ＞
Be careful in connecting electric cord A to control box.
Check the mark of electric cord A and control box.
Then, connect them.
1 1 1 1 - - - - 2 Intermediate Cord
2 Intermediate Cord
2 Intermediate Cord
2 Intermediate Cord
Connect the cords with referring to the following picture. (also refer to the parts list.)
After connecting, fix the cords with bands to the proper place under the table.
1
Advertisement
