Table of Contents
Advertisement
Allocate IRQ for PCI VGA
The optional settings are: No; Yes.
Yes: Assigns IRQ to PCI VGA card if card requests IRQ.
No: Does not assign IRQ to PCI VGA card even card requests an IRQ.
Palette Snooping
The optional settings are: Enabled; Disabled.
Enable: inform the PCI device that an ISA graphics devices is installed in the system
so the card will function correctly.
PCI IDE Bus Master
The optional settings are: Enabled; Disabled.
Enable: BIOS uses PCI busmastering for reading/writing IDE devices.
IRQ Resources
Press Enter and set values in the sub-items asIRQ5, IRQ9, IRQ10,IRQ11, IRQ14 and
IRQ15.
3-10 PC Health
This section shows the Status of you CPU, Fan, and Warning for overall system
status. This is only available if there is Hardware Monitor onboard.
CPU
Temperature/
System
Temperature/
CPUFAN
Speed
/SYSFAN
1Speed/SYSFAN2 Speed/VCORE/NB1V1/5V_ON/VDIMM/5VSYS/12V
This will show the CPU/ /System voltage chart and FAN Speed, etc.
FAN1 Mode Setting
It displays Fan configuration mode setting. User can set it as Disabled or to select
Auto Fan by Duty Cycle to set the highest or lowest temperature settings from the
O
O
range of 0
C to 127
C.
28
Advertisement
Table of Contents
