Load Optimal/Failsafe Defaults; Save Changes And Exit/Discard Changes And Exit - AMD 870 User Manual

boot sector protection. If this function is enabled and someone attempt to write
data into this area, BIOS will show a warning message on screen and alarm beep.
Disabled (default) No warning message to appear when anything attempts to
access the boot sector or hard disk partition table.
Activates automatically when the system boots up causing a warning
Enabled
message to appear when anything attempts to access the boot sector of hard disk
partition table.
3-13 Load Optimal Defaults/ Load Failsafe Defaults
Load Optimal Defaults
When you press <Enter> on this item, you get a confirmation dialog box with a
message similar to:
Pressing <OK> loads the default values that are factory settings for optimal
performance system operations.
Load Failsafe Defaults
When you press <Enter> on this item, you get a confirmation dialog box with a
message similar to:
Pressing <OK> loads the default values that are factory settings for stable
performance system operations.
3-14 Save Changes and Exit / Discard Changes and Exit
Save Changes and Exit
When you press <Enter> on this item, you get a confirmation dialog box with a
message similar to:
Pressing <OK> save the values you made previously and exit BIOS setup.
Discard Changes and Exit
When you press <Enter> on this item, you get a confirmation dialog box with a
message similar to:
33