MARIMEX 19000618-9 Series Installation Manual page 65

Step 17
The picture below shows, what the
trampoline should look like after the
rods have been installed.
Step 19
Lift the spring cover slightly
and thread the clamping
cord alternately through
the loops of the net and
the anchoring loops
of the springs.
Step 20
After you have finished
the installation
of the trampoline,
check all connections again
and tighten them securely.
Step 21
Your trampoline is complete.
Secure the structure against
the effects of the weather
and unwanted displacement
with an anchoring set
(not included). Congratulations,
your trampoline is now
ready for use.
Step 18
With the help of another person, pull
the safety net up and gradually insert
the ring into the ring holders.
EN
65