Hex Parameter Description; System Tx Mode; Data Output; Device Type - Ebyte E180-DTU User Manual
Hide thumbs
Also See for E180-DTU:
- User manual (63 pages) ,
- User manual (35 pages) ,
- User manual (25 pages)
Table of Contents
Advertisement
Chengdu Ebyte Electronic Technology Co., Ltd
6.5 HEX parameter description
6.5.1 System TX mode
Mode:
0x00 Broadcast (default);
0x01 Multicast;
0x02 Unicast+short address;
0x03 Unicast+long address.
6.5.2 Data output
Mode:
0x00 Transparent transmission (Default);
0x01 Data+short address;
0x02 Data+long address;
0x03 Data+RSSI;
0x04 Data+short address+RSSI;
0x05 Data+long address+RSSI.
Note: the maximum packet length is 72 bytes
6.5.3 Device type
dev_type:
0x01 Coordinator
0x02 Router
0x03 Terminal (default)
Changing the device type configuration takes effect after restarting. If the device type is configured in normal
operation, the device will leave the current network and be in a no-network state. After restarting, it will switch to the
changed device type.
6.5.4 Network state
nwk_state:
0x00 No network
0x01 Joining the network currently
0x02 Has joined the network
0x03 A network exists, but the parent node is lost
0x04 Leaving the current network
Copyright ©2012–2017， 成都亿佰特电子科技有限公司
E180-DTU(ZG120-232) Usermanual
16
Advertisement
Table of Contents
