Chengdu Ebyte Electronic Technology Co., Ltd.
2.2.5. Simple to use
interface of M31-AAAX4440G through USB to RS485, A is connected to A, and B is connected to B.
Networking: Plug the network cable into the RJ45 port and connect to the PC.
Power supply: Use DC-12V switching power supply (DC 9 ~ 36 V) to power M31-AAAX4440G .
2.3. Parameter configuration
Step 1: Modify the IP address of the computer to be consistent with the device. Here I changed it to 192.168.3.100
to ensure that it is in the same network segment as the device and that the IP is different. If you cannot connect to
the device after the above steps, please close the firewall and try again;
Copyright © 2012 , Chengdu Ebyte Electronic Technology Co., Ltd.
Distributed IO Host (M31 Series) User Manual
5