Chengdu Ebyte Electronic Technology Co., Ltd.
2.2.4 Easy to use
Wiring: The computer is connected to the RS485 interface of ME31 - XAAX0440 through USB to RS485 , A is connected to A, and B is connected to B.
Networking: the network cable is inserted into the R J45 port and connected to the PC .
Power supply: Use DC - 1 2V switching power supply (DC 8 ~ 28 V ) to power ME31 - XAAX0440 .
2.3 Parameter configuration
Step 1: Modify the IP address of the computer to be consistent with the device. Here I am modifying it to 1
92.168.3.100 to ensure that it is on the same network segment as the device and that the IP is different. If you
cannot connect to the device after the above steps, please turn off the firewall and try again;
Step 2 : Open the network assistant, select the TCP client , enter the remote host IP 1 92.168.3.7 ( default
parameter), enter the port number 5 02 (default parameter), and select HEX to send.
Copyright © 2012–2023 , Chengdu Ebyte Electronic Technology Co., Ltd.
6
ME31- XAAX0440 _User Manual