Serial Port Baudrate; Sleep Time; Saving Time Of Parent Node; Centralized Network Open Time - Ebyte E180-DTU User Manual

Chengdu Ebyte Electronic Technology Co., Ltd
This parameter needs to be configured before joining the network or establishing a network.

6.5.13 Serial port baudrate

Baudrate parameter table:
To change the baud rate of serial communication, it takes effect after restarting the device.

6.5.14 Sleep time

sleep_time: (1～60) Sleep wake cycle 1～60 Unit (second)
(61～255) Sleep wake cycle 60+(61-60)*10～60+(255-60)*10 Unit (second)
Note: This sleep time represents the polling cycle of the terminal and represents the speed at which the terminal
automatically switches the best parent node.

6.5.15 Saving time of parent node

Time: The maximum setting of the Zigbee protocol stack is 30, and the unit is S (seconds). If a terminal node needs
to receive data from the parent node, the configuration of the sleep time cannot be longer than 30 seconds.

6.5.16 Centralized network open time

Open time: (1～254) Network open time range is (1～254)*10
255 Indicates that the network is permanently open

6.5.17 The cycle of network reconnection after the parent node is lost

Rejoin period: (1～255) Reconnection cycle range 1～255 Unit (minute)
Copyright ©2012–2017， 成都亿佰特电子科技有限公司
Buad Baudrate
01 4800
02 9600
03 14400
04 19200
05 38400
06 50000
07 57600
E180-DTU(ZG120-232) Usermanual
Buad Baudrate
08 76800
09 115200 (default)
0A 128000
Unit (second)
18