Data+Short Address; Data+Long Address; Data+Rssi; Data+Short Address+Rssi - Ebyte E180-DTU User Manual

Table of Contents

Chengdu Ebyte Electronic Technology Co., Ltd

5.2.2 Data+short address

When the output mode of the device is data + short address, after the module receives the wireless data, the serial port

will output the original data + short address of the sending device.

When the output mode of the device is data + long address, after the module receives the wireless data, the serial port

will output the original data + long address of the sending device.

When the output mode of the device is data + RSSI, after the module receives the wireless data, the serial port will

output the original data + RSSI value of the received packet.

When the output mode of the device is data + short address + RSSI, after the module receives the wireless data, the

serial port will output the original data + short address of the sending device + RSSI value of the received packet.

When the output mode of the device is data + long address + RSSI, after the module receives the wireless data, the

serial port will output the original data + long address of the sending device + RSSI value of the received packet.

Note: The sender's single packet supports a maximum data packet length of 72 bytes.

LINK pin indicates the current network status of the module. After the device is successfully connected to the

network, the LINK light is always on. When the device has no network or the parent node is lost, the LINK light is off.

In the coordinator mode, this pin indicates whether the module has established a network normally.

E180-DTU(ZG120-232) Usermanual

Table of Contents

Zg 120-232