3. Close the
front panel
4. Install the:
a.
Front bezel
b.
Side cover
5. Follow the procedure in
SD card reader
Removing SD card reader
1. Follow the procedure in
2. Remove the:
a.
Side cover
b.
Front bezel
3. Open the
front panel
4. To remove the SD card reader:
a. Disconnect the SD card reader cable from the connector on the system board [1].
b. Remove the screw that secures the SD card reader to the front panel door [2].
c. Lift the SD card reader out of the system [3].
34
Removing and installing components
door.
After working inside your
Before working inside your
door.
computer.
computer.