SolarEdge Se K Series Installation Manual page 26

25 Front Interface of Synergy Manager
Indication LEDs
LEDs indication consists on color and state (on/ off/ blinking
(3)
). The LEDs indicate different system information, such as errors or performance.
Figure 8 shows the Indication LEDs of the Synergy Manager.
Generally, the main LED indications are:
COMM. ON - the inverter is communicating with the monitoring platform
POWER ON - the system is producing
POWER blinking - AC is connected but the system is not producing power
FAULT ON - system error
(1) Blinking = Turns ON and OFF for the same duration
(2) Flickering = Turns ON for 100 mS and turns OFF for 5 seconds
(3) Alternating = Alternate LEDs flash
Three Phase Inverter with Synergy Technology P/N: SExxK-xxxxIxxxx SExxK-xxxxIxxxx
Figure 8: Indication LEDs
(1) (2)
/ flickering /alternating