I/O Board; Removing The I/O Board - Dell G5 SE 5505 Service Manual

Steps
1. Place the heat sink on the system board and align the screw holes on the heat sink with the screw holes on the system
board.
2. In sequential order (as indicated on the heat sink), tighten the eight captive screws that secure the heat sink to the system
board.
Next steps
1. Install the base cover.
2. Follow the procedure in

I/O board

Removing the I/O board

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
After working inside your
Before working inside your
computer.
computer.
Removing and installing components 39