Table of Contents
Advertisement
Steps
1. Place the power-adapter port into the slot and adhere the power-adapter port cable on the palm rest and keyboard
assembly.
2. Connect the power-adapter port cable to the system board.
3. Adhere the mylar that covers the power-adapter port cable connection on the system board.
4. Align and place the power-adapter port bracket over the power-adapter port.
5. Replace the two screws (M2x3) to secure the power-adapter port bracket to the system board.
Next steps
1. Install the
base
cover.
2. Follow the procedure in
Fans
Removing the left fan
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
About this task
The following image indicates the location of the left fan and provides a visual representation of the removal procedure.
After working inside your
Before working inside your
computer.
computer.
Removing and installing components
33
Advertisement
Table of Contents
