Dell G5 SE 5505 Service Manual page 57

Hide thumbs Also See for G5 SE 5505:
Table of Contents

Advertisement

Table 5. System setup options—Advanced menu (continued)
Advanced
BIOS Auto-Recovery
SupportAssist System Resolution
Auto OS Recovery Threshold
SupportAssist OS Recovery
Table 6. System setup options—Security menu
Security
Admin Password Status
System Password Status
Asset Tag
Admin Password
System Password
Password Change
Computrace
SED Block SID Authentication
PPI Bypass for SED Block SID Command
Firmware TPM
PPI Bypass for Clear Command
Enables BIOS to automatically recover BIOS without user
actions.
Default: Disabled
Controls the automatic boot flow for SupportAssist System
Resolution Console and for the Dell OS Recovery tool.
Default: 2
Enables or disables the boot flow for the SupportAssist OS
Recovery tool in the even of certain system errors.
Default: Disabled
Displays if the administrator password is clear or set.
Displays if the system password is clear or set.
Default: Not Set
Set your system's Asset Tag.
Allows you to set the administrator password. The
administrator password controls access to the system
setup utility.
Allows you to set the system password. The system
password controls access to the computer at boot.
Allows you to permit or deny system password or HDD
password changes.
Default: Permitted
Enables or disables the BIOS module interface of the
optional Computrace Service from Absolute Software.
Default: Deactivate
Enables or disables SED Block SID Authentication.
Default: Disabled
When there is no drive ownership and the
ppibypassforblocksid is enabled, BIOS requires user input
while sending the Block SID authentication command to
SED drives. When ppibypassforblocksid is disabled, BIOS
does not require user input while sending the Block SID
command.
Default: Disabled
Enable or disable the firmware TPM.
Default: Enabled
Allows you to control the TPM Physical Presence Interface
(PPI). When enabled, this setting will allow the OS to skip
BIOS PPI user prompts when issuing the Clear command.
Changes to this setting take effect immediately.
Default: Disabled
System setup
57

Advertisement

Table of Contents
loading

This manual is also suitable for:

P89f

Table of Contents