Installing the touchpad
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the touchpad and provides a visual representation of the installation procedure.
Steps
1. Align and place the touchpad into the slot on the palm-rest and keyboard assembly.
2. Replace the four (M2x2) screws and adhere the tapes that secure the touchpad to the palm-rest and keyboard assembly.
3. Align and place the touchpad bracket into the slot on the palm-rest and keyboard assembly.
4. Replace the three (M2x2) screws that secure the touchpad bracket to the palm-rest and keyboard assembly.
Next steps
1. Install the
system
board.
2. Install the
power-adapter
3. Install the
display
assembly.
4. Install the
right
fan.
5. Install the
left
fan.
6. Install the
wireless
card.
7. Install the
memory
modules.
8. Install the battery.
9. Install the
base
cover.
10. Follow the procedure in
50
Removing and installing components
port.
After working inside your
computer.