Tunturi FITRUN 40i User Manual page 19

Press "SPEED +/-" buttons to select:
1: Male/ 2: Female press "MODE" button to confirm.
- The display shows "F2" (Age) .
The display shows "25"
Press "SPEED +/-" buttons to select:10~99
press "MODE" button to confirm�
- The display shows "F3" (Heigth) .
The display shows "170"cm
Press "SPEED +/-" buttons to select:100~220 cm
press "MODE" button to confirm�
- The display shows "F4" (Weigth) .
The display shows "70"kg
Press "SPEED +/-" buttons to select: 20~150 kg
press "MODE" button to confirm�
- The display shows "F5" (Active)
The display shows "- - - -" (Measure)
⚠ CAUTION
• Holding the contact hand-grip heart rate measurement pads is
required for this function.
Result calculation:
- BODY TYPE: ( Body Fat ratio; 9 types)
• FAT 0 ~19 Underweight
• FAT 20 ~ 25 Standard
• FAT 26 ~ 29 Overweight
• FAT 30 ~ + Obesity
- BF = Body Fat ( in ratio % )
- Error code "ER" will show if no heart rate was detected during the
BF measurement process.
- Press "MODE" button to leave Body Fat program.
HRC Program (HR1~HR3)
The HRC program is a speed/ incline controlled program based on
your heart rate. The speed/ incline will automatically increase when
your heart rate is under target, and decrease when over target.
‼ NOTE
• When heart rate is ± 5 BPM. from target the console will not
adjust intensity�
• First 3 minutes is always "Warm Up" mode. During "Warm Up"
the console will not adjust intensity.
• When training time is +20 minutes, the console will enter "Cool-
down" mode in latest 2 minutes. During "Cool-down mode the
training intensity will decrease gradually.
• During HR program the user is free to adjust speed and incline
manually, but this will not affect the program behaviour.
HR1 Settings
Incline controlled by
Speed controlled by
Max� operation speed
Default training time
Default age setting
Default HR target ( BPM)
HR2 Settings
Incline controlled by
Speed controlled by
Max� operation speed
Default training time
Default age setting
Default HR target ( BPM)
HR3 Settings
Incline controlled by
Speed controlled by
Max� operation speed
Default training time
Default age setting
Default HR target ( BPM)
- Press "PROG" button to select "HR1~HR3"
program, press "MODE" button to confirm.
In setting mode
- Set your workout time
the display shows "22:00"
Press "Up/ Down" buttons to select: 5:00~99:00
press "MODE" button to confirm�
- Set your HR target the display shows "160"
Press "Up/ Down" buttons to select:95~180
press "MODE" button to confirm�
- Press the "START/ PAUSE" button to start the program.
⚠ CAUTION
•
Bluetooth & APP
- This console can connect with an APP on a smart device by
Bluetooth (iOS & Android).
- Establish the Bluetooth connection only via the connection mode
on the installed APP on your smart device.
‼ NOTE
•
•
Warranty
Warranty terms
The consumer is entitled to the applicable legal rights stated in the
national legislation concerning the commerce of consumer goods.
This warranty does not restrict these rights. The Purchaser's Warranty
is only valid if the item is used in an environment approved by Tunturi
Console
New Fitness BV for that particular equipment. The product-specific
User
approved environment is stated in the Owner's Manual provided with
8.0 km/h
your equipment.
22 min�
30 (15~80)
Warranty conditions
The warranty conditions commence from the date of purchase.
150 (95~180)
Warranty conditions may vary per country, so please consult your
local dealer for the warranty conditions.
User
1 9
Console
Console
10.0 km/h
22 min�
30 (15~80)
170 (95~180)
Heart rate measurement is required for this function.
Tunturi only provides the option to connect your fitness console
throughout a blue tooth connection. Therefore Tunturi cannot
be held responsible for damage, or malfunctioning of products
other than Tunturi products.
Check the website for extra information.
English
Console
9.0 km/h
22 min�
30 (15~80)
160 (95~180)