Timberk Harmony Series Instruction Manual page 16

IM2020
SLEEP mode
In this mode, the device will operate in high steam intensity mode by the following cycle:
5 min. operation – 5 min. pause – 5 min. operation – 10 min. pause – 5 min. operation – 15 min. pause
When the device is in SLEEP mode all indicator will be off, except SLEEP indicator - .
TIMER function
Press the button to select shutdown time. Time can be selected in the following order: 1H/2H/4H/8H.
Constant humidity settings (hygrostat function)
During operation of the device press the button to select required relative humidity level. Relative
humidity level can be selected in the range from 40% to 90%. One press of the button equals 5%,
During the setting process, selected humidity level will flash on the display. When the room humidity reaches
the set level, the device will turn off automatically.
Adding essential oils
Pour three or five drops of essential oil in the aroma box (aroma box is located under the water filing cap. It
has the cloth on which the oil must be put). After adding, outlet steam will contain the smell of essential oils.
ATTENTION!
Add the essential oil only in the aroma box
Don't pour the oil directly in the water
Water-soluble essential oils must be used
Switching off
Press the button to turn off the device. Unplug the power cord.
16