Boating Tips; When You Are Finished - ProBoat UL 19 Hydroplane Owner's Manual

30-inch brushless rtr
Hide thumbs Also See for UL 19 Hydroplane:
Table of Contents

Advertisement

EN

Boating Tips

When running your boat for the first time, we
recommend calm wind and water conditions so that you
can learn how the boat responds to your control.
Maximum speeds are only achieved when the water
conditions are smooth and there is little wind. A sharp
turn, wind or waves can turn over a boat when it is
moving quickly. Always pilot your boat for the wind and
water conditions so that the boat does not turn over.
Consult local laws and ordinances before choosing a
location to pilot your boat.
Avoid boating near:
• watercraft
• people (swimming areas, fi shing areas)
• stationary objects
• waves, wakes
• rapidly moving water
• wildlife
• fl oating debris
• overhanging trees
• vegetation

When You Are Finished

1.
Power off the receiver.
2. Power off the transmitter.
3. Disconnect and remove the batteries
from the boat.
Tip: Always remove the canopy before
storage or moisture may allow mold and
mildew to grow in the boat.
10
If the propeller and rudder are blocked with debris or
vegetation, remove the boat from the water and remove
the debris before continuing operation.
When making turns, decrease the throttle to reduce the
probability of flipping the boat over. If necessary, adjust
your steering input to decrease sensitivity.
Never operate your boat in less than 12 inches (30.5 cm)
of water.
If you need to retrieve your boat from the water, use
fishing equipment or another boat.
CAUTION: Never operate your boat in extreme
temperatures or turbulent water.
CAUTION: Never attempt to retrieve a downed boat
by swimming.
NOTICE: When running at full speed in choppy waters,
the prop may exit and re-enter the water repeatedly and
very quickly, subjecting the propeller and flex shaft to some
stress. Frequent stress may damage the propeller and flex
shaft.
1
3
X2
2
UL 19 Hydroplane

Advertisement

Table of Contents
loading

This manual is also suitable for:

Prb08028v2

Table of Contents