Labeling A Cd - Disc Memo - Sony XAV-7W Operating Instructions (primary manual) Operating Instructions Manual

MENU
Tips
• Each press of the V button cycles
through A t B t C t ... Z t 0 t 1
t 2 t ... t 9 t + t - t * t / t
\ t > t < t . t u (space).
The v button cycles in the opposite
order.
• Holding down the V or v button
moves quickly through the character
selection.
• Only upper-case characters are
available.
• Select u to insert a space between
characters.
• When you have made a mistake, press
the B button until the character flashes
and then enter the correct character.
Note
Repeat/shuffle play is suspended until
the Name Edit is complete.
Labeling a CD - Disc Memo (CD unit
with the CUSTOM FILE function)
What is a Custom File?
This feature allows you to store a title for a CD and display
it every time the disc is played. When you use an optional
B/b
available Sony CD changer compatible with the Custom
File feature, each CD can have a name of up to 8 characters,
V/v
and you can use the Disc Memo and List functions.
Follow the steps below with the card remote commander
while the monitor is open.
ENTER
CAUTION
Do not use the CUSTOM FILE feature while driving, or
perform any other function which could divert your
attention from the road.
1
Press MENU during CD playback.
2
Press V or v to select "Name Edit".
3
Press ENTER.
4
Press V or v to select the character, and press
b to move to the next character.
To insert a space, press b again.
5
Repeat step 4 until all desired characters are
input. Then press ENTER.
The regular display appears again.
N a m e E d i t
N a m e E d i t
N a m e E d i t
B
27