CD/MD error messages
When there is a problem related to a CD or MD changer connected to the unit, an alarm tone is
heard and a flashing error indication is shown for 5 seconds.
Error indication
Cause
BLANK
MD is not recorded.
(Blank Disc*)
ERROR
Disc is inserted upside down.
MD cannot be played.
CD is dirty.
HI TEMP
Unit has become too hot.
NO DISC
No disc is inserted in changer.
NO MAG
No magazine is inserted in changer.
(No Magazine*)
NO MUSIC
CD does not contain music information.
NOT READY
MD changer panel is open.
RESET
Operation is impaired due to an unspecified
(Push Reset*)
problem.
LCL Seek +/–
The Local Seek mode is on during automatic
tuning (page 18).
"
" or
You have reached the beginning or the end of
"
"
the disc and you cannot go any further.
* Shown in the LCD monitor.
Remedy
Insert other MD.
Insert disc correctly.
Insert other MD.
Clean CD.
Turn power off and wait a while.
Insert disc.
Insert magazine.
Insert other CD.
Close panel.
Press the reset button on the unit.
49