Labeling A Cd; Disc Memo/Custom File - Sony XR-C8200 Operating Instructions Manual

3
Press either side of (SEEK/AMS) to select
the track you want to insert.
4
Press (5) (ENTER) momentarily to enter
the track.
The current track in that slot number and
the succeeding tracks shift down.
To continue inserting tracks, repeat steps 2
through 4.
Note
Once all 12 slots have been filled, "*Mem full*"
appears in the display, and you cannot insert tracks.
5
When you finish inserting tracks, press
(3) (PLAY MODE) for two seconds.
6
Press (SHIFT).
Erasing the tracks in the program
1
Press (SHIFT), then press (3) (PLAY
MODE) for two seconds.
If you have labeled the disc, the bank edit
mode appears. Press (3) (PLAY MODE) to
display "P1" above.
To select Program 2, press (4) (n)
repeatedly until "P2" appears.
2
Press (1) (N) or (4) (n) to select the
track you want to erase.
C D 1
DISC TRACK
SUR EQ 2 4 P1.‚6
PLAY MODE
The track currently registered in slot 6 of
Program 1.
3
Press (5) (ENTER) for two seconds.
When you erase a track from a slot number,
the succeeding tracks shift up to fill the gap.
D E L
DISC TRACK
SUR EQ - -- P1.‚6
PLAY MODE
4
To continue erasing tracks, repeat steps
2 and 3.
5
When you finish erasing tracks, press (3)
(PLAY MODE) for two seconds.
6
Press (SHIFT).
Track Slot Number

Labeling a CD

— Disc Memo/Custom File

(CD unit with custom file function)
You can label each disc with a personalized
name. You can enter up to 8 characters for a
disc. If you label a CD, you can locate a disc by
name (page 16) and select the specific tracks
for playback (page 16).
1
Play the CD and press (LIST) for two
seconds.
C D 1
DISC NAME
SUR EQ
4 ________
2
Enter the characters.
1 Rotate the dial clockwise to select the
desired characters.
(A n B n C n ··· Z n 0 n 1 n 2 n
··· 9 n + n – n * n / n \ n > n <
n . n _ )
C D 1
DISC NAME
SUR EQ 4 S_______
If you rotate the dial counterclockwise,
the characters appear in reverse order.
If you want to put a blank space
between characters, select "_" (under-
bar).
2 Press (4) (n) after locating the
desired character.
The flashing cursor moves to the next
space.
C D 1
DISC NAME
SUR EQ 4 S_______
If you press (1) (N), the flashing cursor
moves to the left.
3 Repeat steps 1 and 2 to enter the
entire name.
3
To return to the normal CD playback
mode, press (LIST) for two seconds.
Tip
To erase/correct a name, enter "_" (under-bar) for each
character.
EN
15