Assigning A Name To A Station - Sony XAV-7W Operating Instructions (primary manual) Operating Instructions Manual

FM/AM Reception
MENU
Tips
• Each press of the V button cycles
through A t B t C t ... Z t 0 t 1
t 2 t ... t 9 t + t - t * t / t
\ t > t < t . t u (space).
The v button cycles in the opposite
order.
• Holding down the V or v button moves
quickly through the character selection.
• Only upper-case characters are
available.
• Select u to insert a space between
characters.
• When you have made a mistake, press
the B button until the character flashes
and then enter the correct character.
20
Assigning a name to a station (Station
Memo)
When you have assigned a name to a broadcast station, the
name will be shown while the station is being received. Up
to 62 station names can be stored, and each name can be up
to 8 characters long.
B/b Follow the steps below with the card remote commander
while the monitor is open.
V/v
1
Receive the station to which you want to
assign a name, and press MENU.
ENTER
2
Press V or v to select "Name Edit".
3
Press ENTER.
4
Press V or v to select the character, and press
b to move to the next character.
To insert a space, press b again.
5
Repeat step 4 until all desired characters are
input. Then press ENTER.
The regular display appears again.
N a m e E d i t
N a m e E d i t
N a m e E d i t
B