Setting the Clock
MENU
Tip
When "Dual Information" is set to "on",
the time is always displayed (page 39).
14
This unit uses 12-hour time indication.
To set the clock, use the card remote commander while the
monitor is open.
1
Press MENU.
Press V or v to select "Clock".
B/b
C l o c k
V/v
2
Press ENTER.
C l o c k
ENTER
1 Press V or v to set the hours.
2 Press b to move to the minutes, and pressV or v to set the
minutes.
V: increases the value
v: decreases the value
3
Press ENTER.
The regular display appears again.
1 : 0 0