› Keep the operating instructions in a place where it can be accessed by everyone� A copy of the complete EU Declaration of conformity can be requested at sales@ika�com� › Ensure that only trained staff work with the device�...
› Covers or parts that can be removed from the device without tools must later be refitted to The MATRIX ORBITAL DELTA PLUS device is used for mixing / tempering liquids in closed ensure safe operation� This will prevent the infiltration of foreign objects, liquids and other tubes and closed plates in the preparation of samples�...
Enter the programs menu� Touch it once: main menu is displayed� “Menu“ button Touch it a second time: back to the working screen� IKA MATRIX ORBITAL DELTA PLUS Warranty card “Back“ button Return to the previous menu level� Mains cable USB cable Touch it once: Pause the mixing and tempering function�...
Indicate the device is in program control mode� Power failure symbol Indicate a previous power supply interruption� IKA ThermoCover Symbol Indicate IKA ThermoCover is attached to the device� Note: The symbols displayed change depending on the status and settings of the device�...
Page 8
/// Attaching the exchangeable attachments /// Inserting the deepwell plate (DWP) / microplate (MTP) /// Inserting the micro test tubes Click...
/// Attaching the Cover / ThermoCover Operation /// Switching on Shaker IKA MATRIX ORBITAL Delta + Version: 1.02.003/1.01.021 IKA MATRIX 2.0 mL 0:00:00 0:00:00 25.0 Fast actual ºC actual rpm Set ºC Set rpm Note: After the contact of the ThermoCover cover has been established with the device by...
Page 10
/// Setting the temperature and starting tempering /// Setting the speed and starting mixing IKA MATRIX 2.0 mL IKA MATRIX 2.0 mL 0:00:00 0:00:10 0:00:00 0:00:00 25.0 38.0 Fast actual ºC actual rpm Fast actual ºC actual rpm 38.0 Set ºC Set rpm Set ºC...
Page 11
/// Pausing the tempering and mixing function /// Restarting the tempering and mixing function IKA MATRIX 2.0 mL IKA MATRIX 2.0 mL 0:00:19 0:00:19 0:00:30 0:00:30 38.0 28.0 Fast actual ºC actual rpm Fast actual ºC actual rpm 38.0 38.0 Set ºC...
Page 12
/// Locking the buttons /// Unlocking the buttons IKA MATRIX 2.0 mL IKA MATRIX 2.0 mL 0:00:39 0:00:40 0:00:50 0:00:51 38.0 38.0 Fast actual ºC actual rpm Fast actual ºC actual rpm 38.0 38.0 Set ºC Set rpm Set ºC Set rpm IKA MATRIX 2.0 mL...
/// Using the "Quick mix" function Menu navigation and structure /// Menu navigation Quick IKA MATRIX 2.0 mL 0:00:00 0:00:00 25.0 Fast actual ºC actual rpm Fast 38.0 Set ºC Set rpm › Press the “Menu” button (G)� › Select right menu item by touching the speed (+) button (L)�...
Page 14
/// Menu structure /// Menu details Factory setting Tempering Control rate Fast √ Tempering: Moderate Control rate: Slow In the "Control rate" menu option, you can select the desired control rate between "Fast", "Mod- erate" and "Slow"� A check mark (√) indicates the control rate is activated� Mixing Intermittent mode Activate...
Page 15
Timer: Programs: In the "Timer" menu option, you can set "Timer / Counter" for "Mixing" and "Tempering" In the “Programs“ menu option, you can create 5 user-defined “Speed / Temperature /Time” separately� profiles� You can set "Timer" value from 00:00:01 [hh:mm:ss] to 99:59:59 [hh:mm:ss]� In addition, you can define the control mode (Time, Temperature hysteresis and Ramp) in the The tempering / mixinig function stops automatically after the set time has elapsed and the set program�...
In the ”Sound“ menu option, you can activate or deactivate the key touch sound� A check Install the driver by running the setup file� Connect the IKA device through the USB data cable mark (√) indicates that the menu option is activated�...
Page 17
1�1)� and mixing functions are switched off in accordance with the set “watchdog” function or are The NAMUR commands and the additional specific IKA commands serve only as low level changed to the set target values� commands for communication between the device and the PC� With a suitable terminal or The data transmission may be interrupted by, for example, a crash in the operating system, a communications program these commands can be transmitted directly to the device�...
Page 18
› Temperature can not reach the set value after a certain time� For this, you need register on our website MyIKA first� After registering your device IKA will inform you about available updates for your devices� Effect › Mixing function off ›...
RT - 15 °C 1 x DWP 2000 rpm For IKA PCR 96, IKA PCR 384, IKA 0�5 ml, IKA 1�5 ml, IKA 2�0 ml and IKA CARRIER (MTP & DWP)� For cleaning disconnect the mains plug! IKA Abdeckung Use only cleaning agents which have been approved by IKA to clean the devices: Note: For even tempering and to protect the samples from unwanted exposure to light�...
Max� shaking weight 0�3 In accordance with IKA warranty conditions, the warranty period is 24 months� For claims under the warranty please contact your local dealer� You may also send the machine direct to our factory, enclosing the delivery invoice and giving reasons for the claim� You will be liable for freight costs�...
Page 21
VIETNAM IKA Vietnam Company Limited Phone: +84 28 38202142 eMail: sales�lab-vietnam@ika�com Discover and order the fascinating products of IKA online: www.ika.com IKAworldwide IKAworldwide /// #lookattheblue @IKAworldwide Technical specifications may be changed without prior notice�...
Need help?
Do you have a question about the MATRIX ORBITAL DELTA PLUS and is the answer not in the manual?
Questions and answers