Device setup/Dangerous parts Device setup Item Designation Mains switch Door handle Device foot Operator Panel and display USB interface and temperature limit Mains socket Venting flap Dangerous parts Fig. 2...
Source language: German Contents Page Device setup/Dangerous parts ���������������������������������������������������������������������������������������������������������������������� 2 Declaration of conformity ���������������������������������������������������������������������������������������������������������������������������� 4 Explication of warning symbols ������������������������������������������������������������������������������������������������������������������� 4 Safety instructions ��������������������������������������������������������������������������������������������������������������������������������������� 4 General information �����������������������������������������������������������������������������������������������������������������������������������������������������4 Operation ��������������������������������������������������������������������������������������������������������������������������������������������������������������������5 Transport und Installation ��������������������������������������������������������������������������������������������������������������������������������������������5 Heating �����������������������������������������������������������������������������������������������������������������������������������������������������������������������5 Maintenance ���������������������������������������������������������������������������������������������������������������������������������������������������������������5 Correct use ��������������������������������������������������������������������������������������������������������������������������������������������������� 6 Useful information ���������������������������������������������������������������������������������������������������������������������������������������...
Declaration of conformity We declare under our sole responsibility that this product corresponds to the regulations 2006/42/EG, 2014/35/EU, 2014/30/EU and 2011/65/EU and conforms with the standards or other normative documents: EN 61010-1, EN 61010-2-010, EN 61326-1, EN 60529, EN ISO 12100 and DIN 12880� Explication of warning symbols Indicates an (extreme) hazardous situation, which, if not avoided, will result in death, DANGER...
• Only use IKA approved accessories! ® tention to the residual heat after switching off� • Use only original IKA ® spare parts! • Only process and heat up any media that has a flash point • The feet of the equipment must be clean and undam- higher than the adjusted temperature limit that has been aged�...
Correct use Use: The IKA Oven 125 basic - dry is a drying oven for a wide range of heating, drying and heating application� The device may only be used for heating up non-explosive substances and objects� Do not process substances or ob- jects that might cause explosive vapor�...
Unpacking Unpacking: Delivery scope: - Please unpack the device carefully� - IKA Oven 125 basic - dry - In the case of any damage a detailed report must be - 2 shelves sent immediately (post, rail or forwarder)� - Screwdriver (for adjustment of temperature limit)
- Load shelves evenly� Stacking the device: Never stack more than two devices� NOTICE When stacking the device, four persons are required to lift it� In order to keep enough space, please use stacking adapter recommend by IKA � ® Stacking adapter <...
Changing the door opening direction: When changing the door opening direction, two persons are required due to the heavy WARNING (about 15 kg) of the door� Open the door� Hold the door and loosen the hinge pin with a suitable tool� ...
Operator panel and display Item Designation Function LED display (temperature): Display the temperature� LED display (flap): Display the air flap opening percentage of the venting� LED display (Timer/Counter): Display the timer/counter value� LED indicator (Counter): Indicate the counter function is activated� “Counter/Timer”...
Setting the temperature limit Adjust the temperature limit (increase the value by clock- The temperature limit setting will appear on the display� wise / decrease the value by counterclockwise) with screw- driver delivered with the device� Temperature limit Factory setting: approximate max. value Adjustment range: see “Technical data“�...
Counter and timer function: Timer function: Counter function: The “Timer” can be adjusted by pressing “Timer (+)” key (K) When the heating function is started by pressing “Start/ or “Time (-)” key (L)� Stop“ key (I), the counter will start automatically and coun- During operating, the “Timer”...
Operating mode: Enter the calibration information by pressing “Start/Stop” key (I) and following screens appear: Mode A: The device doesn’t restart again after power on/ power failure� The setting of heating temperature is adjustable� If the device is selected 3-point calibration, following cali- bration information screen will appear: Mode B: The device restart again after power on/power failure�...
Page 14
Set the first point temperature (e�g� 100 ºC) by pressing Confirm the selected calibration type by pressing “Start/ Stop” key (I)� “Temp (+)” key (O) or “Temp (-)” key (P)� Switch to the first point calibration screen by pressing “Tim- er (+)”...
Dirt Cleaning agent may constitute a health hazard� For repair, please request the “Decontamination Certificate” Isopropyl alcohol from IKA , or download printout of it from the IKA web- ® ® Construction Water containing tenside/isopropyl alcohol site www�ika�com�...
If the actions described fails to resolve the fault or another error code is displayed then take one of the following steps: - Contact the service department - Send the device for repair, including a short description of the fault� Accessories USB 2�0 cable A - B Labworldsoft ® See more accessories on www.ika.com.
Note: Complies to EN61000-3-11 subject to conditional connection: Zmax = 0�362 Ω� If necessary, consult your electricity supplier� Subject to technical changes! Warranty In accordance with IKA warranty conditions, the warranty The warranty does not cover worn out parts, nor does it ap- ®...
Need help?
Do you have a question about the Oven 125 basic dry and is the answer not in the manual?
Questions and answers