RIB JOLLY BIG ONE Manual page 25

J-CRX ELECTRONIC CONTROL PANEL FUNCTIONS
Control of 1 JOLLY BIG TWO
Control of 2 JOLLY BIG ONE mounted on the same shutter (works only one group of limit
switches)
Operation with time
Automatic closure
Step by step control or automatic
Exclusion of the total automatic close function
CRX Type with radio receiver built inside
Microprocessor autotest on the security imputs according to EN12453 (point 5.1.1.6,
paragraphs "e" and "f")
Flasher with card or courtesy light with timer (2 minutes)
Adjustment of the force through trimmer
Led to segnalise the board state
Management of the photocells
Management of the safety strips
Safety strip autotest as required by EN12453
CONTROL AND SAFETY ACCESSORIES
ELECTRO-BRAKE
Utilized for all JOLLY BIG versions as a safety system in case of shutter with damaged springs
(Only one electro-brake for JOLLY BIG ONE and JOLLY BIG TWO). Fed by a motor, equipped with
cable, sheath, release knob in case of black-out.
NC
NO
C
S
S
AD-
AD-
A*A+
A*A+
code ACJ9019
POWER
STONE STRONG BOX TO BUILD-IN
Safety box preventing the access to controlling devices.
Supplied as a standard, with toggle switch (open-close) and electric brake release system,
in the versions.
Of die-cast aluminium - IP54.
25
J-CRX 120/60Hz - code ABJ7079
J-CRX 230/50-60Hz - code ABJ7080
code ACJ9078
G
B