Table of Contents
Advertisement
7.5
Headrest
This accessory is designed to support to head. It is suitable for folding wheelchairs; in fact, this type of headrest has a folding
structure.
When you unfold the wheelchair, the headrest unfolds, too.
To put the headrest in its operating position, pull it up until the two posts A are tilted downward, starting from the central block B.
Before folding the wheelchair, you should push the central block B down.
The occupant or the assistant can easily adjust the position of the headrest according to the occupant's need.
Unscrew the knob 1 to adjust the height.
Unscrew the knob 2 to adjust the depth.
Unscrew the knob 3 to adjust the pad by turning it up/down/right/left.
After each adjustment, screw the knob fast and make sure the system is stable.
Always check the adjustment; in fact, if the system is unstable, it may be cause risky situations.
After loosening each adjustment knob, you can also remove the corresponding parts.
7.6
Rear wheels / tyres / hand rims
This model comes with only one type of rear wheel. It is fitted with a high-pressure tyre and an aluminium hand rim.
For occupants who need more grip, a silicon cover can be mounted on the aluminium hand rim.
7.7
Clothing guards
The lateral clothing guards are in plastic and of the "mudguard" type.
These are originally fixed with their edges approximately 5 mm above the tyre to prevent occupants from inserting their fingers
between tyre and mudguard itself.
B
A
A
1
5 mm
Exelle Vario Classic
3
2
31
Advertisement
Table of Contents
