Beko BEKOMAT 16 CO Original Installation And Operation Manual page 10
Hide thumbs
Also See for BEKOMAT 16 CO:
Table of Contents
Advertisement
BEKOMAT
®
16 CO
DANGER
DANGER
DANGER
DANGER
CAUTION
10 | 60
Operation of plant outside the permissible limit range!
Operation of the product or accessories outside the permissible limits and operating
parameters, unauthorised interference and modifications may result in death or serious
injury.
•
For safe operation of the product and accessories, always adhere to the limit values,
operating parameters and maintenance intervals as well as the set-up and ambient
parameters specified on the type plate and in the manual.
•
Inspect whether the operating parameters have been amended or restricted by the use
of accessories.
Pressure build-up in the pipework!
Death or serious personal injury can result through contact with fast or suddenly escaping
compressed gas or through bursting system parts.
•
All work on the compressed gas system must be carried out in the depressurised state
and with the compressed gas system secured against unintentional pressure build-up.
•
Set up a safety area around the working area during all assembly, installation,
maintenance and repair work.
•
Before building up pressure in the pipework, check all pipe connections and tighten if
necessary.
•
Slowly pressurise the system with pressure.
•
Avoid pressure blows and high differential pressures.
•
Assemble all pipelines without stress.
•
Avoid any vibrations occurring in the pipe network by using vibration dampers.
Electric voltage!
There is a danger of death or serious injuries following contact with components which are
in contact with electric voltage. Malfunction and device failure as well as material damage
can occur.
•
The product and the accessories may only be connected to the current supply if they are
undamaged.
•
Only carry out installation, maintenance and repair work on the product and accessories
when they have been disconnected and secured against being switched back on again.
•
Set up a safety area around the working area during all installation, maintenance and
repair work.
•
Only operate the product and accessories with the cover or housing complete and
closed.
Use of incorrect spare parts, accessories or materials!
The use of incorrect spare parts, accessories or materials, as well as auxiliary and operating
materials, may result in death or serious injury. Malfunction and device failure as well as
material damage can occur.
•
For all work, only use undamaged original parts, auxiliary and operating materials which
are specified by the manufacturer.
•
Use only the approved materials and suitable tools for the respective purpose and make
sure that they are in proper working order.
•
Only use cleaned pipes that are free of dirt and corrosion.
Polluted condensate!
Contact with condensate containing substances which endanger health and the
environment can pose a health hazard, causing irritation and/or damage to the eyes,
skin and mucous membranes. Polluted condensate must be prevented from entering the
sewerage system, waters or the ground.
•
Use personal protective equipment.
•
Pick up and dispose of any escaped or spilled condensate in line with local regulations.
Original installation and operation manual
Advertisement
Table of Contents
