Beko BEKOMAT 16 CO Original Installation And Operation Manual page 22

BEKOMAT ® 16 CO
Wrong
22 | 60
Right Description / explanation
Deflecting surface!
In the case of direct drainage from the compressed
gas line a deflection of the compressed gas flow is
necessary!
Continuous slope!
If a pressure hose is used for inflow, avoid the
formation of a water pocket!
Continuous slope!
When laying pipes for the feed line, avoid the
formation of a water pocket.
Continuous slope!
Lay the condensate inlet line with a continuous slope!
If the installation height is limited, mount the lower
inlet with a separate venting line.
Note the minimum height of installation!
The height of the condensate inlet must be located
lower than the lowest point of the collecting tank (e.g.
vessel).
Original installation and operation manual